When working on a quartz clock movement measurement the post has to be long enough to go through whatever thickness that the clock face/dial, might be. This applies to all Clockworks quartz movements, including chiming quartz, and time only quartz movements. To clarify, the post is the part that goes through the dial (face) and mounts from the front and what is in a quartz clock movement measurement. This is so it can match up with the new quartz movement. When completing a quartz clock movement measurement, you will need to measure the post on the old movement. Altogether, these are the assembly instructions for the time only quartz clock movement into the clock case.Ĭlockworks offers multiple post lengths for quartz movements. Likewise, Quartz clock movement installation is usually very easy. Now it is out of the way and installation of the new quartz clock movement bought from Clockworks can be done. So, if this is the case, very gently pry the movement off of the back of the clock with a screwdriver. On occasion, the movement will have glue holding it in place. In essence, the movement will fall out the back of the clock dial. Then remove the hex nut that is on the post where the hands were. Every clock is different so thoroughly look your clock over to see how it was put together. Some clocks will have a glass bezel that will have to be taken off in order to get to the hands. Of course, this is done by removing the hands from the clock. Sometimes this is straightforward and sometimes it can be tricky. The first step is to get the old unit out of the way. In essence, this is a quick step by step practical guide for the quartz clock movement installation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |